Posted on by lookcam

What range of CCTV cameras can cover 100 meters?

This Ansjer camera is a 1080p version of the 720p remote night vision camera. It’s very similar in all its features, except that this camera offers a higher resolution video – a full HD 1080p. This HD security camera uses Ansjer technology to deliver crisp, clear, high-definition video that can run on a regular coax rg59u or better distance up to 1600ft without the need for a repeater. It has a 2.8-12 mm manual zoom lens that can be manually adjusted at the camera to achieve a 90° to 20° viewing angle when zooming. At 1080p resolution, you can see up to 25 feet of facial detail in the 80° view (4mm setting) and up to 50 feet of face detail in the 20° view in the 12mm setting. This is a perfect camera for normal viewing with a lot of night vision. There are 10 ultra-high-intensity infrared LEDs that provide night vision for the camera to view the general details of 300 feet. If there is ambient lighting, the camera can see farther details at night.

This is a sturdy security camera because it is IP66 weatherproof, which means it can be used outdoors without the need for any cover from rain, snow, or dirt. The camera also has a three-axis bracket that can be mounted on a ceiling, wall or pole at almost any angle. The camera is also tamper-proof; its video/power tail fiber passes through the metal mounting bracket to protect it from tampering.

Ansjer cameras, such as such remote night vision cameras, are the preferred choice for upgrading existing security camera systems compared to more expensive IP cameras that require re-wiring with Cat5e or Cat6.

If you are looking for a 1080p HD security camera with the highest night vision distance, we recommend using this camera.

Posted on by lookcam

Is there still a record even if the plug of the CCTV camera is not unplugged?

Homeowners across the country have discovered the calmness of installing their own home security systems, and a device that has emerged in recent years is a wireless system. These products can be customized with fire alarms and carbon monoxide detectors, but typically use security cameras and sensors that allow users to monitor their home while on the go. In addition, they are as effective as full-size open and closed circuits. They also offer a degree of customization to meet the protection needs of each owner. But can this make their system interfere with thieves?

Wireless home security

Wireless home security systems are more complex than systems that use built-in circuitry. Cutting a small wire may invalidate the entire system in an open or closed circuit system, and even disabling the keyboard may give the intruder more time to process the homeowner’s property. In addition, wireless alarm systems are more cautious and versatile than wired designs, so owners can continue to add devices to settings they deem appropriate.

Wired home security

Traditional systems are difficult to update with modern technology, additional cameras or glass breakage sensors, so owners and businesses that have been hoping to protect their structures through sophisticated monitoring are more free to use wireless systems for updates. The key is to invest in a system with built-in cellular technology. This technology is actually safer than traditional alarm systems because there are no wires or grids that can be tampered with. Even if the thief can completely cut off the home power or damage some equipment, the user can still receive signals from the system and react to the flow as needed.

Smart devices and home security

In addition, these systems can be synchronized with the homeowner’s smartphone, and they can receive consistent updates and check-in as long as they want to ensure that their home is not potentially dangerous. Wireless systems are affordable and can work in a variety of private and business environments, making them an excellent choice for owners and staff looking for safe and reliable protection needs.

Posted on by lookcam

Why are there so many surveillance cameras in the casino?

There are sure to be thieves in rich places – what Hollywood movies say.

As a casino owner, casino security – a place full of cash and a breeding ground for theft, deception and other crimes should be your priority.

The Eye of the Sky casino security camera (system) is definitely one of the most effective security measures to protect casino or casino security.

You can get the best security camera (system) for the casino and see the important areas where the casino level/quality security camera should be installed.

What type of security camera should you choose for the casino?

Where should you install a surveillance camera for the casino?

The hottest question about casino security cameras (for anyone!)

#1. Choose the best casino camera (system) for your casino

When you buy a casino security camera, you need to focus on some important features. Here are the main elements to keep in mind when searching for security cameras for your casino.

1. Select IP Security Camera (System)

2. Invest in PTZ IP camera or complete security camera system

Buy an IP security camera (system) for the casino/poker room

There are three types of security cameras commonly found on the market: IP security cameras, analog cameras and CCTV cameras.

IP security cameras outperform two other home/enterprise security cameras in many ways. The casino IP security camera gives you clearer images/videos. This type of security camera gives you more features such as motion detection, email alerts, app push notifications and more.

You can get more information when comparing IP cameras, analog cameras and CCTV cameras.

As you know, some Las Vegas or Macau casino security cameras are still DVR analog. Some security cameras used in casinos are even video recorders.

You must upgrade your casino security camera to an IP type. The casino IP security camera can help you read the license plate number and identify a person’s face within a certain distance. If a casino bookmaker or gambler cheats in your poker room, or has any unusual activity, clear images and videos do help as evidence.

Choose a PTZ IP security camera or a complete security camera system for the casino

You can purchase a separate security camera or a complete security camera system to monitor your casino.

When you buy an all-in-one IP security camera for your casino, remember to purchase a PTZ IP camera type. The PTZ IP security camera can be rotated 360 degrees to cover your casino. A PTZ IP security camera is equal to multiple fixed IP security cameras.

You can set preset locations and patrols or cruises to monitor your casino with a PTZ security camera. It saves your budget when you invest in a separate IP security camera for casinos, gaming tables, poker rooms, etc.

Bump: You can choose to buy a dome security camera for the casino. This type of security camera is almost impossible to let people know which direction they are monitoring. The dome security camera can be installed on the ceiling of your casino, which helps monitor and record the dealer. Or a gambler’s playing card or point card.

Complete IP security camera system

The complete NVR security camera system is your best choice for protecting casinos, hotels and corridors around the clock.

All tapes or feet will be saved on the NVR, and you can view all the things happening in the casino parking lot, lobby, slot area, etc.

If there is a vehicle intrusion in your casino parking lot, you can view the recorded video to find the criminal for your dealer or customer.

A complete casino camera system typically includes multiple IP security cameras, which is convenient for you or the casino staff to manage or monitor the entire casino security camera in the casino surveillance room.

#2. An important casino area where a security camera (system) is installed

You may notice that the casino has surveillance cameras almost everywhere. However, you cannot install a security camera at will.

You should ensure that the following areas of the casino are covered and protected by IP security cameras:

Entrance. Place IP security cameras at the entrance and exit of the casino to capture the footprints of all dealers, gamblers or customers entering and exiting the casino.

Cashier area. One of the most important areas of the casino should be a place full of money and chips. Remember to use a high-definition IP security camera to monitor areas that swap or store large amounts of money and chips.

Open area. Cover all open areas with IP security cameras, including hotel corridors, restaurants, retail stores, gaming halls, escalators, parking lots, etc., so that the casino’s security department can detect unusual activity.

Game facilities. Make sure your casino security camera can monitor and record game/gambling facilities such as gaming tables, slot machines, etc. to see if there are fraud and suspicious behavior.

As a casino owner or manager, you should provide casino monitoring training to ensure that your security staff can meet your expectations for monitoring the casino.

Speaking of casino security, you should not gamble.

#3. Casino security camera – the hottest issue

Are you curious about the casino security camera? Here are some of the most popular questions about casino security cameras (systems).

1. Why are there so many cameras in the casino?

2. How long does the casino’s surveillance videotape/videotape/foot release?

3. What advanced features does the casino security camera have?

There are a lot of reasons for surveillance cameras in the casino.

Why are there hundreds of cameras in Las Vegas (US) and Macau casinos?

One of the main reasons for installing security cameras (systems) in casinos is that they prevent fraud, theft, robbery, rape and other criminal acts.

As you may know, the security camera of the Valley River Casino helps a person who robs a customer to be convicted. The stealing shot of the Reef Casino caught sexual harassment.

These examples show the effectiveness of casino security cameras. That’s why Skagit Casino Resort and other casinos choose to add more security cameras to their casinos, poker rooms and slot machines.

A staff member working in the casino monitoring department said: “From the moment you enter the casino, you are monitored by “eyes in the air”. Each slot machine has a security camera, so the monitoring team can view your footprints. Find the appearance of the thief.”

There are security cameras everywhere on the casino’s table. Security guards monitor gamblers and seize any attempt to cheat.

Another important reason to install a security camera in a casino is the rules of the game. The rules of the game require that each table game and each cashier have a special coverage and is equipped with a security camera.

How long is the surveillance video/video tape of the casino saved?

How long does the casino retain/back up the video or monitor the footprint? How is its storage quality?

The security time of the casino security camera video footprint varies, depending on the sensitivity of the footprint and the rules of the game for video recording.

Some game rules require casinos to keep surveillance videos for 6 months or 1 year. After that, it depends on whether the casino owner wants to keep them.

Video quality or video coding varies from casino to casino. Some casinos store video at standard 4:3@480p, 60fps to 720p HD, while some casinos use H.264 IP security cameras to record video streams. The video recorded by the H.264 IP security camera is clearer than the analog camera.

What advanced features does the casino security camera have?

With the advanced technology of security cameras, casino security cameras have some great features that you will be interested in.

Face recognition

Some casinos use facial recognition technology, which alerts the casino manager when a security camera detects a blacklisted player/gambler. When someone is arrested by a gambling commission (Nevada) or a casino in Las Vegas, the person’s photo will be uploaded to the database and mapped for identification. A CCTV surveillance camera system can be connected to this database to find people who are banned.

Automatic tracking

The automatic tracking feature of the casino security camera is very useful, which is very useful for monitoring casino staff for stealing money. The security camera continues to track wherever the staff moves. Every action will be monitored and recorded.

Posted on by lookcam

How do I know if my CCTV camera is turned on?

It really depends on whether you care about being detected in the process and how much you are willing to invest in the device, but that’s for sure. If there are no other obvious signs, such as the pan/tilt and tilt motor, the camera will turn on.

Low-tech method: This is actually similar to how a doctor tests a patient’s involuntary reflex response, directing the light source directly at the patient’s eye and observing their pupil dilation (or lack thereof).

Most well-designed CCTV cameras have a device called Auto Aperture (AI). Basically an automatic method of changing the aperture size of a lens, allowing the correct amount of light to fall on the imaging device. The lens will include a micromotor and an amplifier for maintaining a desired voltage video signal that is produced by varying degrees of light falling on its image sensor.

By changing the level of light received by the camera’s artificial intelligence sensor, you can visually check the iris movement of the camera from the camera’s inability to record your angle (depending on the depth of field), and even hear the presence of such artificial intelligence motors. Because these are precision stepper (or stepper) motors, you can hear the hum of it spinning or adjust the faint hum of the stepping. But be careful, some ultra-quiet stepper motors have been developed, but I haven’t seen CCTV cameras really using them.

Similar tests can be applied to other camera components (such as autofocus), and the tester can maintain varying degrees of concealment during testing.

High-tech method: This is very easy and quite obvious – the electronic bug can detect harmful emissions (basically EMI: RF-> microwave -> IR field at its falling wavelength / increasing frequency). Obviously, they all have some way to tell you where the compromise launch is coming from, and in most cases will tell you the specific frequencies and their exact strengths.

Nowadays, this kind of equipment has become quite cheap, you can buy equipment with good performance from local dealers for hundreds of dollars, and even buy used equipment from online dealers for about a quarter of the price. . Since the choice is quite good, I won’t give you any links to specific products and don’t want to endorse any specific manufacturer.

This test is suitable for both cable TV and wireless CCTV cameras. The cable CCTV system will generate a so-called balanced signal at boot time, which is a video signal that can be transmitted over a “twisted pair” cable after conversion, while wireless (RF or less common infrared, from camera to receiver) The direct line of sight of the CCTV system is more obvious and will transmit higher energy radiation (outside the influence of its internal circuitry) within its specified range.

Now, another part of the problem – detection, if the video/audio feed is actually being recorded – the answer is a bit difficult, depending largely on what system we are talking about here:

Analog recording systems (which are rare today) add more delay to the electromagnetic field when turned on, when the electromagnetic field emits a closed loop (which produces a feedback spike in the sine wave oscillation), basically moving the signal to a point on the power line (or alone) Signal cable, if not). T combination). This may or may not be detected by your device. Please note that I mean, here is only the exact moment when the recording device is turned on or off, and if it is in continuous operation mode, it will be difficult to detect which state it is in. It is obviously helpful to know the system in advance and actually measure its signal level when switching on/off.

Digital CCTV systems are a pretty tricky test if they really record or not. In fact, you can’t tell that just one receiver is working, or the recording system is doing work connected to the receiver. If you are lucky, you will encounter a directly controllable IP camera with a variable bit rate (VBR) A/V feed encoder chip. This change in the required bit rate can be detected by a better electronic bug, but it is helpful to know in advance the changes in the electromagnetic interference that can be detected by an accurate CCTV system. But with the CBR/ABR (constant or average bit rate) encoder, you are likely to be lucky.

Now, I didn’t write anything about disabling them, because you are not really asking this question, but maybe it’s just a short description. In fact, the more advanced they are, the easier it is to achieve, and for most new ones, you All that is needed is a suitable pocket/flashlight-sized green laser (532 nm) that is oriented for a few seconds. Go directly to their CCD/CMOS sensor. The higher their resolution, the faster they will give up, depending on the laser’s rated power, due to the arrangement of the lens elements, their focus, ie the TC on the wireless system, how much light diffraction we are talking about, you can Their death is detected by observing their sensors suddenly falling. n affects the emission intensity (the camera’s on-board video compression will be optimal, all images at the same frame rate are the same, thus reducing the radio frequency transmission, ie reducing the bandwidth).

Keep in mind that CCTV cameras may be much more numerous than cameras and are equipped with sound and/or activity (moving/proximity/pressure changes/other harmful emissions/…) detection sensors. The most interesting thing is (for me, I really don’t care if I find it or not), I am very prepared for anything that might happen, but inadvertently, your appearance will interfere with some wild animals (bats, birds) , rodents, etc.), this will scare and trigger the reaction of the CCTV system to you.

Posted on by lookcam

Which country has the most CCTV cameras?

At Vintech, we believe that your sense of security will never be affected and the best protection is prevention. Cities around the world are building their monitoring networks to help protect our communities. In Chicago, Mayor Daley said, “The camera can identify the perpetrator. It’s that simple… a lot of cases are solved by a camera: a car’s ID card, a license plate and a face…. It is a better solution that saves taxpayers’ money and does not allow for abuse.”

Have you ever thought about where is the largest surveillance camera network?

According to the statistics of the security industry, the top five security camera network cities have:


1. Beijing

According to the Beijing Security and Protection Industry Association (BSPIA), since the end of 2010, Beijing has installed about 400,000 surveillance cameras and added 70,000.

2. London

Surveillance cameras do not have to be registered in London, so there is no exact statistics. A recent sample survey found that 41% of public places in London have CCTV equipment, and they estimate that there are about 420,000 cameras in London.

The United Kingdom began installing video surveillance cameras in the 1960s, and by August 1996, cameras were installed in all major cities. Today, the UK as a whole has the largest network of surveillance cameras, with an estimated 1.85 million cameras or one camera per 14 people.

3. Chicago

In 2005, a homeland safety network called Operation Virtual Shield (OVS) was established in Chicago, which consisted of 600 miles of fiber that spanned the city. The signals from these surveillance cameras and sensors are centrally monitored by the City Emergency Operations Center. The system captures and processes camera feeds in real time and is able to detect suspicious or dangerous activities and identify their location. It is estimated that there are more than 17,000 cameras in Chicago, including 4,000 installed in Chicago public schools and at least 1,000 installed in O’Hare International Airport. Chicago currently has the largest and most advanced surveillance network in the United States. Mayor Dali “called the second best thing for the police in every corner.”

4. Houston

The number of surveillance cameras in Houston has not been announced yet, but we know that the number is growing. The city of Houston is estimated to have a population of 2.3 million and the crime rate is close to Chicago: 1100 1200 violent crimes than Chicago. The reason for this secrecy and controversy is that homeland security protects the US border. “Houston is a staunch “refuge city” with a large number of illegal immigrants.” Harold Hurtt, head of the Department of Homeland Security’s immigration law enforcement program, has resolutely implemented immigration measures that prohibit the identification of suspects’ immigration status. For this reason, the exact number of security cameras has not been released to the public.


5. New York

It is estimated that there are more than 4,450 cameras in New York City, most of which are owned by private companies.

It is expected that next year (2012), Chongqing, China will surpass the security systems in London and Beijing, becoming the world’s largest urban surveillance network with more than 500,000 cameras. These cameras will be used for crime prevention, emergency control and rescue operations.

Although surveillance is sometimes considered to be “big brother” or “invasion”, etc., Weid thinks that public security cameras are necessary. Chicago Mayor Daley said: “The camera is used to prevent crime – tell the criminals, ‘Yes, you will concentrate.’ This is nothing wrong. In order to have good citizens, use our sidewalks and parks, let us Children go to school. Let our family get up and down the church and feel comfortable. We don’t monitor anyone. This is an open way. We don’t monitor, identify or racially analyze anyone.”

Installing a high-quality video surveillance system at home or in the enterprise is one of the best investments you can make, not only to protect your property, but also to protect your community. We will work together to improve the security of the United States.

Posted on by lookcam

What is the average angle of a CCTV camera?

Security cameras, when they tell you that it is a 2.1.2.7, 3, 4, 6 camera, you must consider the angle it opens.

By number, the larger it is, the smaller the angle it opens, and the smaller the number, the greater the angle at which the security camera opens.

Usually you can tell that the security camera is variable focal length, from 2.8 mm to 12 mm, which means you can increase and decrease your vision. Usually the security camera with zoom is more expensive, while the fixed-lens camera and fixed lens are The angle of the camera is unchanged for Zion.

As you can see, it tells you that a security camera with a 2.8mm lens can be turned 90 degrees, that is, from the wall to the wall, and looks very good at a distance of 5 meters, through a larger degree of closure, you You can have a greater depth of view, as shown, if you have a 16mm lens, it will give you an 18 degree view and you can see a depth between 70 and 80 meters.


There are security cameras called wide-angle lenses, those that are smaller than 2.8 or open at more than 90 degrees. Fisheyes are usually placed in the center of an area, which can be 360 ​​degrees. These wide-angle cameras can be found in IP technology security cameras.

Posted on by lookcam

Who invented the first CCTV?

The use of security cameras was initially a security element of military readiness.

In 1942, the German army used the CCTV surveillance system for the first time.

The first system consisted solely of black and white cameras connected to the monitor and was important for observing the V2 missile test in preparation for a long-range military attack.

A quadrant generator then appears to be able to view multiple cameras simultaneously on the same monitor.

The first recorder was recorded with a video recorder and then recorded on a digital disc.

At the same time, the camera is constantly evolving, putting black and white aside, focusing on the color, greatly improving the resolution.

Viewing systems


As for the observation system, the current versatility is far from the first installation.

Initially, camera systems were called closed-circuit television because, as the acronym showed, they were closed-circuit televisions and did not enter from any monitor or device outside the circuit.

With the advancement of communication technology, the first recorder with a network card began to appear, and the application can be viewed from an external computer.

Remote access

This type of access is now implemented with the advent of well-known smartphones, tablets and other mobile devices, so it can now be viewed remotely from any electronic device and anywhere in the world. The old CCTV has become a video verification system.

Posted on by lookcam

How to suspend a CCTV camera?

We admit: we are paranoid. We have a fair amount of electronics in our homes, and thieves like electronics, so it makes sense to protect them. Moreover, because the bluffing spending in the government has banned the automatic mini-gun city in the suburban home, we took a look at Ansel’s external CCTV camera.

The £220 Ansjer247ext, as officially known, offers a very significant set of features that will be an asset to your home security and help prevent your laptop from falling into the crime of the Brotherhood of Crime. Dirty hand.

First, it has a motion detector, so when someone walks up your garden path, it can start. As with all the best surveillance devices, you can define the area of ​​the motion detection scan so that the person or car that passes through does not trigger the recording function.

There is also a suitable infrared illumination system in front, provided by an array of eight LEDs. This is very important, providing surprisingly powerful lighting in completely dark conditions. Light-emitting diodes are visible, meaning that anyone who suspects that the camera can record them at night will realize that they are wrong when they are close enough.

As a happy reward, we can choose to record sounds, not something that every camera on the market can boast, and there is a speaker that lets you solve any possible burglary.

There are two ways to control the camera, through the web interface or some of the software provided in the box. If you have multiple cameras, we recommend that you use the software, but the web interface may be sufficient for your single-core needs.

We like Ansjer247ext to save your video files to network attached storage. There is also an ftp upload feature, which means it can put files directly into the cloud, and no one in the cloud can tamper with them. If someone breaks into your house, this can be a huge boon, so you can provide evidence to the police or you might be stolen by your device.

Installing the camera is fairly easy, including screws and plugs. For brick walls, you have to drill a hole large enough to unplug and then screw the camera bracket into those holes. If there is wood in front of your house, the screws provided are self-tapping and they will adhere to the surface of the wood.

The camera can send video over a wireless or Ethernet cable. We have all tested it and they work very well. However, wireless technology is impressive, and it is the best way to use the camera today, because it uses 802.11n Wi-Fi, which increases speed and increases the range of signals.

Power is another matter, you need to drill a hole in the wall to power the camera. This may be a little bit beyond the average person, but a handyman may help a considerable amount of money.

If you install it outside – why not? — Then, when you hear the camera waterproof, the port and socket are protected by a rubber shield, you will be very excited. We do not recommend that you rinse it with a water pipe, but there are enough protective measures to keep it from rain.

In all our ansjer tests, we didn’t miss any external actions at all. The files are ftped to our Western Digital NAS, from where they can be sent to cloud-based backups. Ansjer has a service and you can also subscribe for an extra charge.

In short, this simple configuration camera has all the features that homeowners need. This is not the cheapest tool we have ever seen, but we are pretty sure it is cheaper than replacing everything you have. Hell, this may be cheaper than the excess cost of your home insurance.

Posted on by lookcam

Can I use any cable size for security cameras?

Plug and play cable

Plug and Play Cable (PNP) is very easy to use. They are much like standard audio/video RCA cables for connecting stereo and TV equipment. The power, video, and audio connectors are pre-connected and color coded. Red indicates power, yellow indicates video, and white indicates audio (sometimes not used). The figure below shows one end of a set of PNP cables.

Plug and play cables are available in 25, 65, 100, 150 and 200 feet. You should decide which cable length is best for your installation. One disadvantage of using plug-and-play cables is that the cables are not strictly shielded (such as the RG59 Siam cable), so you may experience interference on long-distance lines. We recommend that you do not use PNP cables that exceed 150 feet. Another disadvantage is that these cables are not customizable from your DVR to a security camera.

All DVRs and security cameras we offer have BNC negative connections, which is why we offer RCA to BNC positive converters and all monitoring systems with plug-and-play cables (2 converters per cable). The audio and video connectors (white and yellow) at the end of the plug and play cable are RCA plugs. When connecting a PNP cable to a security camera and DVR, you must first connect the RCA to the BNC connector and connect it to each end of the video RCA (yellow). This can be seen in the image below.

The power cord connector (red) on the plug-and-play cable contains a male conductor at one end and a female conductor at the other end. The ANSJER security camera we provide has a female power cord, so the male end of the plug and play cable is connected to the security camera. The female end will be connected to the camera’s power supply. Then, plug the camera power into a wall outlet or power strip.


RG59 coaxial Siam cable

The RG59 Siam Cable contains a video coaxial cable and a pair of 18th power cable in a jacket. The RG59 is a highly shielded cable that better isolates interference and is more convenient to use when there is a long distance between the security camera and the DVR. The RG59 is also more durable than the PNP cable. The RG59 cable can be cut to the exact distance between each security camera and your DVR. The downside is that the RG59 does not include an audio cable and is not as easy to install as a plug-and-play cable because of the special tools required and the requirement to cut and install each cable line.

When you order a monitoring system with RG59 cable from us, we offer 2 BNC male connectors for each security camera included in the monitoring system. After disconnecting the cable length to operate the camera, the BNC male connector must be connected to each end of the cable before connecting the security camera to the DVR. The stripping tool must be used to expose the RG59 cable before the twisting is installed.

If you order a monitoring system with an RG59 cable, we provide a 3″ PT-3 male connector for each security camera included in the system. The PT-3 connector is used to connect the 18 gauge power cord to each security camera. This can be achieved by using a pair of wire nuts. The white stripe PT-3 wire is positive and should be connected to the red wire 18 on the RG59 cable. All security cameras include a female power connection. Connect the PT-3 to After the RG59 power cord, the PT-3 wire is plugged into the female power connector of each security camera.

If you ordered a monitoring system with an RG59 cable and no power box, you need to connect the power supply that came with the security camera to the power cord of the RG59 cable. This is done by cutting the camera’s power supply using a cutter about 3 inches from the camera connector. As shown in the image to the right, the two wires on the left should be slightly separated and stripped using a wire stripping tool or a cutting tool, and then wired to the RG59 power cable using a wire nut. Security camera power box

The power box provides a convenient way to power all your security cameras neatly through a centralized power supply. The power box does not need to manage multiple power outlets and surge protectors to plug in all of the security camera power, but instead allows you to centrally manage up to 18 cameras from a single box. When using the RG59 cable and power box, a separate camera power supply is not required. The power cord on the RG59 cable plugs directly into the power box.

Posted on by lookcam

What causes the CCTV camera network to malfunction?

It’s hard to understand the problems with your CCTV, which is why our team organizes a guide to help you solve the problem.

1. Verify camera power and connectivity

Sometimes the problem may be as simple as a broken wire, or it may even be that the network is currently turned off. Internet Protocol (IP) cameras typically have LED indicators for transmitting data to the network, but this may be hidden inside the camera.

If the LED on the camera is not lit, you should check to see if the camera is externally powered (plugged into the wall). If your camera is powered by electricity instead of battery, you will need to check if the camera is receiving the proper power because a complex camera (such as pan/tilt zoom) will require more power and a normal plug will be provided.

2. Discover and ping camera

Find the IP address of the camera by checking the camera’s directory. Once you find your address, you can “ping” it with your laptop or smartphone to test the strength of the connection.

Type “cmd” in the Windows search engine, which will open a DOS command prompt. When this pops up, you will be asked to enter “ping” and your IP address.

You may see a “Request Timeout” or “Unable to access the target host” on the screen. If so, check that the device you are using is on the same network as your camera. If you see the camera on the web, try using a browser connection.

3. Know the username/password

If you can ping the camera and find that you can’t connect, you may have entered the wrong login or password. If this is the reason, please refer to the manual.

4. Check the ARP form

Check the Address Resolution Protocol (ARP) table, usually outside the camera. ARP cross-reference MAC and IP addresses can be used.

5. Confirm no IP conflict

If you have multiple cameras, you need to make sure they have different IP addresses, as this will prevent you from accessing one or all of the cameras.


6. Update firmware

Note that your camera is up to date. You can do this by connecting to vms and accessing the camera’s web page.

7. Restart the camera

Sometimes this is the first thing we do – turn off the system for 10-20 seconds, then enter your settings again.

8. Check cable

Make sure the cable is straight and intact, as this can be the source of the problem if there are knots or loose cables.

9. Factory reset camera

This can be a very daunting task because you may lose all your history, but this process will help resolve any issues. Simply press the paper clip into the pinhole reset button on the back to complete the factory reset.

10. Please call the manufacturer or remote monitoring provider for support

If you are not sure, seek expert help, experts can help you every step of the way.